port-powerpc-ja(by thread) of Aug, 2001
[ Indexes |
Main Index
|
Date Index
]
Re: PM7500 arch/macppc/dev/ofb.c (640 x 480 or 1280 x 1024)
Æ£¸¶ À¿/ Makoto Fujiwara
Re: PM7500 arch/macppc/dev/ofb.c (640 x 480 or 1280 x 1024)
Tsubai Masanari
NG: 20010806 Re: (mount_ffs) proc: table is full - increase kern.maxproc or NPROC
Æ£¸¶ À¿/ Makoto Fujiwara
Re: NG: 20010806 Re: (mount_ffs) proc: table is full - increase kern.maxproc or NPROC
Æ£¸¶ À¿/ Makoto Fujiwara
OK: 20010704 Re: (mount_ffs) proc: table is full - increase kern.maxproc or NPROC
Æ£¸¶ À¿/ Makoto Fujiwara
Re: NG: 20010806 Re: (mount_ffs) proc: table is full - increase kern.maxproc or NPROC
Æ£¸¶ À¿/ Makoto Fujiwara
Re: NG: 20010806 Re: (mount_ffs) proc: table is full - increase kern.maxproc or NPROC
Tsubai Masanari
ramdiskbin works (Re: (mount_ffs) proc: table is full - increase kern.maxproc or NPROC)
Æ£¸¶ À¿/ Makoto Fujiwara
mount_ffs of 20010618 OK ( Re: proc: table is full - increase kern.maxproc or NPROC)
Æ£¸¶ À¿/ Makoto Fujiwara
__vfork14 ? ( Re: proc: table is full - increase kern.maxproc or NPROC)
Æ£¸¶ À¿/ Makoto Fujiwara
Re: NG: 20010806 Re: (mount_ffs) proc: table is full - increase kern.maxproc or NPROC
Tsubai Masanari
OK: 20010801 (Re: (mount_ffs) proc: table is full - increase kern.maxproc or NPROC)
Æ£¸¶ À¿/ Makoto Fujiwara
Re: OK: 20010801 (Re: (mount_ffs) proc: table is full - increase kern.maxproc or NPROC)
Tsubai Masanari
INSTALL kernel
SUNAGAWA Keiki
Re: INSTALL kernel
Æ£¸¶ À¿/ Makoto Fujiwara
Re: INSTALL kernel
SUNAGAWA Keiki
Re: INSTALL kernel
Tsubai Masanari
boot from secondary IDE drive
Æ£¸¶ À¿/ Makoto Fujiwara
periph_target is 0 (Re: boot from secondary IDE drive)
Æ£¸¶ À¿/ Makoto Fujiwara
Re: periph_target is 0 (Re: boot from secondary IDE drive)
Æ£¸¶ À¿/ Makoto Fujiwara
Re: periph_target is 0 (Re: boot from secondary IDE drive)
Æ£¸¶ À¿/ Makoto Fujiwara
Re: port-macppc/13756 (Re: boot from secondary IDE drive)
Æ£¸¶ À¿/ Makoto Fujiwara
Re: port-macppc/13756 (Re: boot from secondary IDE drive)
Tsubai Masanari
Re: PowerBook G4 with firmware ROM 4.1.8
ngc
Re: PowerBook G4 with firmware ROM 4.1.8
Tsubai Masanari
Re: PowerBook G4 with firmware ROM 4.1.8
ngc
G4 Dual 800MHz
Tsubai Masanari
[ Indexes |
Main Index
|
Date Index
]
Mail converted by
MHonArc
2.4.6