[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[pbsd-mg2] 1.4 boot status on Vr4102?
私は問題をNetBSD 1.3であって、相変わらず問題をNetBSD 1.4Kであれます。
私のinit binaryを腐り果てりしょうか？もっと初の snapshot はですので私
は mini-0705.tar.bz をします。
I'm having the same problem with NetBSD 1.4K that I did with 1.3.
Maybe my init binary is corrupted? Is there a newer snapshot since
the mini-0705.tar.bz?
ワーナー
Warner
Copyright (c) 1996, 1997, 1998, 1999
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 1.4K (GENERIC) #35: Fri Sep 3 17:07:19 MDT 1999
imp@anvil.village.org:/sand/imp/hpcmips/sys/arch/hpcmips/compile/GENERIC
NEC VR4102 rev1.0
total memory = 16384 KB
avail memory = 13300 KB
using 230 buffers containing 920 KB of memory
../../../../arch/hpcmips/vr/vr.c(162): vr_bus_reset() not implemented.
mainbus0 (root)
cpu0 at mainbus0: cpu0: NEC VR4100 CPU Rev. 4.2 with software emulated floating point Rev. 0.0
cpu0: L1 cache: 4kb/16b Instruction, 1kb/16b Data, direct mapped
cpu0: No L2 cache
vrip0 at mainbus0
vrcmu0 at vrip0 addr 0xb000060-0xb00007f
vrgiu0 at vrip0 addr 0xb000100-0xb00011f intr 8vrip_intr_setmask2:
level1[8] level2 mask:........|..|..|.|..||||||||||.|.
Output-port:,,,,,,,;,,,,,,,;,,,,;;;;,;;,;,;;.|...|||...|||...||||||||||||||.
gpbus1 at vrgiu0 comctrl=-1 button=[-1 9 10 11 12 7 4 6 5 1 20 8]
vrip_intr_setmask2:
level1[8] level2 mask:................................
vrip_intr_setmask2:
level1[8] level2 mask:......................|.........
vrip_intr_setmask2:
level1[8] level2 mask:.....................||.........
vrip_intr_setmask2:
level1[8] level2 mask:....................|||.........
vrip_intr_setmask2:
level1[8] level2 mask:...................||||.........
vrip_intr_setmask2:
level1[8] level2 mask:...................||||.|.......
vrip_intr_setmask2:
level1[8] level2 mask:...................||||.|..|....
vrip_intr_setmask2:
level1[8] level2 mask:...................||||.||.|....
vrip_intr_setmask2:
level1[8] level2 mask:...................||||.||||....
vrip_intr_setmask2:
level1[8] level2 mask:...................||||.||||..|.
vrip_intr_setmask2:
level1[8] level2 mask:...........|.......||||.||||..|.
com0 at vrip0 addr 0xc000000-0xc000007 intr 9vrgiu_port_write: not defined port name0
: ns16550a, working fifo
com0: console
vrip_intr_setmask2:
vrrtc0 at vrip0 addr 0xb0000c0-0xb0000df intr 2vrip_intr_setmask2:
vrbcu0 at vrip0 addr 0xb000000-0xb00001f
vrkiu0 at vrip0 addr 0xb000180-0xb00019f intr 7vrip_intr_setmask2:
level1[7] level2 mask:................
vrip_intr_setmask2:
level1[7] level2 mask:................
vrpmu0 at vrip0 addr 0xb0000a0-0xb0000bf intr 1vrip_intr_setmask2:
vrisab1 at vrgiu0:ISA port 0x15000000-0x18000000 mem 0x10000000-0x20000000
isa1 at vrisab1
pcic0 at isa1 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 1507331
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has sockets A and B
ISA IRQ 3 -> GPIO port 23
vrip_intr_setmask2:
level1[8] level2 mask:...........|.......|||||||||..|.
pcmcia0 at pcic0 controller 0 socket 0
pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: SunDisk, SDP, 5/3 0.6
pcmcia0: Manufacturer code 0x45, product 0x401
pcmcia0: function 0: fixed disk, ccr addr 200 mask f
pcmcia0: function 0, config table entry 0: memory card; irq mask 0; memspace 0; maxtwins 1; powerdown
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0; memspace 0; maxtwins 1; powerdown
pcmcia0: function 0, config table entry 2: I/O card; irq mask 4000; iomask a, iospace 1f0 3f6; memspace 0; maxtwins 1; powerdown
pcmcia0: function 0, config table entry 3: I/O card; irq mask 4000; iomask a, iospace 170 376; memspace 0; maxtwins 1; powerdown
pcmcia0: function 0, config table entry 7: I/O card; irq mask 4000; iomask a, iospace 170 376; memspace 0; maxtwins 1; powerdown
wdc0 at pcmcia0 function 0 port 0x15000330-0x1500033f
isa_intr_alloc:............................|...
vrip_intr_setmask2:
level1[8] level2 mask:........|..|.......|||||||||..|.
pcmcia0: card irq 3
wd0 at wdc0 channel 0 drive 0: <SunDisk SDCFB-48>
wd0: drive supports 1-sector pio transfers, lba addressing
wd0: 45MB, 734 cyl, 4 head, 32 sec, 512 bytes/sect x 93952 sectors
pcmcia1 at pcic0 controller 0 socket 1
pcmcia2 at pcic0 controller 1 socket 0
pcmcia3 at pcic0 controller 1 socket 1
../../../../arch/hpcmips/vr/vr.c(162): vr_bus_reset() not implemented.
boot device: wd0
root on wd0a dumps on wd0b
isa_intr_alloc:............................|...
vrip_intr_setmask2:
level1[8] level2 mask:........|..|.......|||||||||..|.
pcmcia0: card irq 3
WARNING: old BSD partition ID!
isa_intr_alloc:............................|...
vrip_intr_setmask2:
level1[8] level2 mask:........|..|.......|||||||||..|.
pcmcia0: card irq 3
WARNING: preposterous clock chip time
-- CHECK AND RESET THE DATE!
root file system type: ffs
About to fork init
About to fork pagedaemon
About to fork reaper
scheduler
start_init
check_console done
Trying path /sbin/init
init: copying out flags `-s' 3
init: copying out path `/sbin/init' 11
trap: reserved instruction in kernel mode
trap: reserved instruction in kernel mode
status=0x2, cause=0x828, epc=0x8013cce8, vaddr=0xc000beb0
pid=8 cmd=init usp=0x7fffef50 ksp=0xc1aa4b80
Stopped in init at vrrtc_intr+0x14: lw v1,48(a0)
db> trace
vrrtc_intr+14 (c000be80,80030470,7c03,801852e5) ra 80138724 sz 40
vr_intr+68 (c000be80,80030470,7c03,801852e5) ra 0 sz 32
User-level: pid 8
db> ps
PID PPID PGRP UID S FLAGS COMMAND WAIT
>8 1 8 0 2 0x4 init
7 0 0 0 3 0x20204 pcic0,1,1 pcicev
6 0 0 0 3 0x20204 pcic0,1,0 pcicev
5 0 0 0 3 0x20204 pcic0,0,1 pcicev
4 0 0 0 3 0x20204 pcic0,0,0 pcicev
3 0 0 0 3 0x20204 reaper reaper
2 0 0 0 3 0x20204 pagedaemon daemon_
1 0 1 0 3 0x4084 init wait
0 -1 0 0 3 0x20204 swapper schedul
db>