[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MobilePro + ATA HDD

NotePC (NetBSD-1.4N) の方に cross compile 環境を作り kernel を
最新にして上げたところ MobilePro 770 MC-R520A + EZ-GIG + MK1004MAT で
無事に boot 出来るように成りました。

Xircom CompactCard Ethernet 10 が、まだ NetBSD 上で動いてくれないので
Network unreachable で何かと不便ですが・・・

# keymap が違うマシンをお持ちの皆さんは既に対応済なのでしょうか？

Copyright (c) 1996, 1997, 1998, 1999
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4O (HAL) #2: Wed Nov 17 11:29:11 JST 1999
    root@nowhere:/usr/pkg/emul/mips/usr/src/sys/arch/hpcmips/compile/HAL
NEC VR4121 rev0.0
total memory = 32768 KB
avail memory = 28272 KB
using 435 buffers containing 1740 KB of memory
../../../../arch/hpcmips/vr/vr.c(175): vr_bus_reset() not implemented.
mainbus0 (root)
cpu0 at mainbus0: cpu0: NEC VR4100 CPU Rev. 6.0 with software emulated floating point Rev. 0.0
cpu0: L1 cache: 16KB/16B Instruction, 8KB/16B Data, direct mapped
cpu0: No L2 cache
fb0 at mainbus0: rasops 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0 at fb0
../../../../arch/hpcmips/dev/fb.c(471): fb_alloc_screen()
../../../../arch/hpcmips/dev/fb.c(507): fb_show_screen()
../../../../arch/hpcmips/dev/fb.c(471): fb_alloc_screen()
wsdisplay0: screen 0 added (std, vt100 emulation)
vrip0 at mainbus0
vrcmu0 at vrip0 addr 0xb000060-0xb00007f
vrgiu0 at vrip0 addr 0xb000100-0xb00011f intr 8vrip_intr_setmask2:
level1[8] level2 mask:................|..|..|.....||..
Output-port:,,,,,,,,,,,,,,,,,;,,;;;;;;;;;;;;|.|..||.......||..||.|.|..||....
gpbus0 at vrgiu0 comctrl=14 button=[-1 4 6 -1 -1 -1 -1 -1 -1 -1 -1 -1]
vrip_intr_setmask2:
level1[8] level2 mask:................................
vrip_intr_setmask2:
level1[8] level2 mask:...........................|....
com0 at vrip0 addr 0xc000000-0xc000007 intr 9: ns16550a, working fifo
com0: console
vrip_intr_setmask2:
vrrtc0 at vrip0 addr 0xb0000c0-0xb0000df intr 2vrip_intr_setmask2:

vrbcu0 at vrip0 addr 0xb00000-0xb00001f
vrkiu0 at vrip0 addr 0xb000180-0xb00019f intr 7vrip_intr_setmask2:
level1[7] level2 mask:.............||.
vrip_intr_setmask2:
level1[7] level2 mask:................

wskbd0 at vrkiu0 mux 1
vrpmu0 at vrip0 addr 0xb0000a0-0xb0000bf intr 1vrip_intr_setmask2:

vrisab0 at vrgiu0:ISA port 0x14000000-0x18000000 mem 0x10000000-0x20000000
isa0 at vrisab0
pcic0 at isa0 port 03e0-0x3e1 iomem 0x70000-0x73fff irq 589827
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only
ISA IRQ 3 -> GPIO port 9
vrip_intr_setmask2:
level1[8] level2mask:.........................|.|....
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcmcia1: CIS version PCMCIA 2.0 or 2.1
pcmcia1: CIS info: Apricorn, ATA PC Card
pcmcia1: Manufacturer code 0x1f9, product 0x0
pcmcia1: function 0: fixed disk, ccr addr 200 mask f
pcmcia1: function 0, config table entry 0: memory card; irq mask 0; mwait_required rdybsy_active wp_active bvd_active
pcmcia1: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; mwait_required rdybsy_active wp_active bvd_active io8 io16 irqshare irqpulse irqlevel
pcmcia1: function 0, config table entry 2: I/O card; irq mask 4000; iomask a, iospace 1f0-1f7 3f6-3f6; maxtwins 2; mwait_required rdybsy_active wp_active bvd_active io8 io16 irqshare irqpulse irqlevel
pcmcia1: function 0, config table entry 3: I/O card; irq mask 8000; iomask a, iospace 170-177 376-376; maxtwins 2; mwait_required rdybsy_active wp_active bvd_active io8 io16 irqshare irqpulse irqlevel
wdc0 at pcmcia1 function 0 port 0x14000330-0x1400033f
isa_intr_alloc:............................|...
vrip_intr_setmask2:
level1[8] level2 mask:......................|..|.|....
pcmcia1: card irq 3
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK1004MAT>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 1033MB, 2100 cyl, 16 head, 63 sec, 512 bytes/sect x 2116800 sectors
wd0: drive supports PIO mode 4, DMA mode 2
pcmcia2 at pcic0 controller 1 socket 0
../../../../arch/hpcmips/vr/vr.c(175): vr_bus_reset() not implemented.
IPsec: Initialized Security Association Processing.
boot device: wd0
root on wd0a dums on wd0b
isa_intr_alloc:............................|...
vrip_intr_setmask2:
level1[8] level mask:......................|..|.|....
pcmcia1: card irq 3
isa_intr_alloc:............................|...
vrip_intr_setmask2:
level1[8] level2 mask:......................|..|.|....
pcmcia1: card irq 3
wdc0:0:0: not ready, st=0x80, err=0x00
wd0a: device timeout reading fsbn 16 of 16-31 (wd0 bn 184480; cn 183 tn 0 sn 16), retrying
wd0: soft error (corrected)
readclock: 99/1/1/3/32/54=>915161574 (942808016)
WARNING: clock lost 319 days -- CHECK AND RESET THE DATE!
root file system type: ffs
swapctl: adding /dev/wd0b as swap device at priority 0
Automatic boot in progress: starting file system checks.
/dev/rwd0a: file system is clean; not checking
setting tty flags
starting network
configuring network interfaces:.
net.inet6.ip6.forwarding: 0 -> 0
net.inet6.ip6.accept_rtadv: 0 -> 0
building databases...
starting system logger
checking for core dump...
savecore: no core dump
starting rpc daemons: portmap.
mount_kernfs: kernfs on /kern: No such file or directory
mount_procfs: procfs on /proc: No such file or directory
setting securelevel: kern.securelevel: 0 -> 1
checking quotas: done.
clearing /tmp
updating motd.
standard daemons: update cron.
starting network daemons: inetd.
starting local daemons:.
Thu Dec 31 19:33:22 PST 1998

NetBSD/hpcmip

NetBSD/hpcmips (Amnesiac) (console)

login: 

# 既に 1.4O どこまで行くのでしょう？