[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

MobileGear II MC-R530

	NEC MC-R530を、pbsdboot.exeのMC-R520用設定使って、serial consoleで
	あげたときの出力です。
	SanDisk 96M compact flashをつっこんでいます。
	割り込みが一本あがりっぱなし。おしりの方はuniqしてあります。
	よくわかってないのですが、
>#  + REC button       : 4
>gpbus0 at vrgiu? platform NEC_MCR_5XX comctrl 14 button1 4 button2 6
	"button1 4"をどうにかすべきなのかな? 録音ボタンはないんだよね。

	普通の文字の部分を叩いてもunknown scan codeとは言われませんが、
	function keyあたりを叩くと言われます。
	ということで、一部keyboard scan codeが違いそうです。

	液晶画面はなにもでません。というか、WinCEの画面そのままです。
	というわけで現状serial consoleにしないと(-h なしだと)使えません。
	フレームバッファ探しの旅に出ます。

itojun

Copyright (c) 1996, 1997, 1998, 1999
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4M (GENERIC) #0: Tue Nov  9 04:56:58 JST 1999
    shin@touji:/work/src/comdex/src/sys/arch/hpcmips/compile/GENERIC
NEC VR4121 rev1.2
total memory = 16384 KB
avail memory = 13216 KB
using 230 buffers containing 920 KB of memory
/work/src/comdex/src/sys/arch/hpcmips/vr/vr.c(175): vr_bus_reset() not implemented.
mainbus0 (root)
cpu0 at mainbus0: cpu0: NEC VR4100 CPU Rev. 6.0 with software emulated floating point Rev. 0.0
cpu0: L1 cache: 16KB/16B Instruction, 8KB/16B Data, direct mapped
cpu0: No L2 cache
fb0 at mainbus0: rasops 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0 at fb0
/work/src/comdex/src/sys/arch/hpcmips/dev/fb.c(459): fb_alloc_screen()
/work/src/comdex/src/sys/arch/hpcmips/dev/fb.c(495): fb_show_screen()
/work/src/comdex/src/sys/arch/hpcmips/dev/fb.c(459): fb_alloc_screen()
wsdisplay0: screen 0 added (std, vt100 emulation)
vrip0 at mainbus0
vrcmu0 at vrip0 addr 0xb000060-0xb00007f
vrgiu0 at vrip0 addr 0xb000100-0xb00011f intr 8vrip_intr_setmask2:
level1[8] level2 mask:................|..|.||.....||..
Output-port:,,,,,,,,,,,,,,,,,;,,;;;;;;;;;;;;.............|....||....|.||....
gpbus0 at vrgiu0 comctrl=14 button=[-1 4 6 -1 -1 -1 -1 -1 -1 -1 -1 -1]
vrip_intr_setmask2:
level1[8] level2 mask:................................
vrip_intr_setmask2:
level1[8] level2 mask:...........................|....
com0 at vrip0 addr 0xc000000-0xc000007 intr 9: ns16550a, working fifo
com0: console
vrip_intr_setmask2:
vrrtc0 at vrip0 addr 0xb0000c0-0xb0000df intr 2vrip_intr_setmask2:

vrbcu0 at vrip0 addr 0xb000000-0xb00001f
vrkiu0 at vrip0 addr 0xb000180-0xb00019f intr 7vrip_intr_setmask2:
level1[7] level2 mask:.............||.
vrip_intr_setmask2:
level1[7] level2 mask:................

wskbd0 at vrkiu0 mux 1
vrpmu0 at vrip0 addr 0xb0000a0-0xb0000bf intr 1vrip_intr_setmask2:

vrisab0 at vrgiu0:ISA port 0x14000000-0x18000000 mem 0x10000000-0x20000000
isa0 at vrisab0
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 589827
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only
ISA IRQ 3 -> GPIO port 9
vrip_intr_setmask2:
level1[8] level2 mask:.........................|.|....
pcmcia0 at pcic0 controller 0 socket 0
pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: SunDisk, SDP, 5/3 0.6
pcmcia0: Manufacturer code 0x45, product 0x401
pcmcia0: function 0: fixed disk, ccr addr 200 mask f
pcmcia0: function 0, config table entry 0: memory card; irq mask 0; memspace 0; maxtwins 1; powerdown
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0; memspace 0; maxtwins 1; powerdown
pcmcia0: function 0, config table entry 2: I/O card; irq mask 4000; iomask a, iospace 1f0 3f6; memspace 0; maxtwins 1; powerdown
pcmcia0: function 0, config table entry 3: I/O card; irq mask 4000; iomask a, iospace 170 376; memspace 0; maxtwins 1; powerdown
pcmcia0: function 0, config table entry 7: I/O card; irq mask 4000; iomask a, iospace 170 376; memspace 0; maxtwins 1; powerdown
wdc0 at pcmcia0 function 0 port 0x14000300-0x1400030f
isa_intr_alloc:............................|...
vrip_intr_setmask2:
level1[8] level2 mask:......................|..|.|....
pcmcia0: card irq 3
wd0 at wdc0 channel 0 drive 0: <SunDisk SDCFB-96>
wd0: drive supports 1-sector pio transfers, lba addressing
wd0: 91MB, 734 cyl, 8 head, 32 sec, 512 bytes/sect x 187904 sectors
pcmcia1 at pcic0 controller 0 socket 1
pcmcia2 at pcic0 controller 1 socket 0
/work/src/comdex/src/sys/arch/hpcmips/vr/vr.c(175): vr_bus_reset() not implemented.
button.........................|.|....
button.........................|.|....
button...........................|....
button...........................|....
vrkiu: Unkown scan code 0x21
button...........................|....
vrkiu: Unkown scan code 0x21
button...........................|....
vrkiu: Unkown scan code 0x55
button...........................|....
vrkiu: Unkown scan code 0x55
button...........................|....
vrkiu: Unkown scan code 0x20
button...........................|....
vrkiu: Unkown scan code 0x20
button...........................|....
vrkiu: Unkown scan code 0x5c
button...........................|....
vrkiu: Unkown scan code 0x5c
button...........................|....
vrpmu: GPIO[3] activation
vrpmu: POWER switch detected
button...........................|....
vrpmu: POWER switch detected
button...........................|....
vrkiu: Unkown scan code 0x08
button...........................|....
vrkiu: Unkown scan code 0x08
button...........................|....
vrkiu: Unkown scan code 0x00
button...........................|....
vrkiu: Unkown scan code 0x00
button...........................|....
vrkiu: Unkown scan code 0x08
vrkiu: Unkown scan code 0x10
button...........................|....
vrkiu: Unkown scan code 0x08
vrkiu: Unkown scan code 0x10
button...........................|....
vrkiu: Unkown scan code 0x45
button...........................|....
vrkiu: Unkown scan code 0x45
button...........................|....
vrkiu: Unkown scan code 0x10
button...........................|....
vrkiu: Unkown scan code 0x10
button...........................|....
vrkiu: Unkown scan code 0x08
button...........................|....
vrkiu: Unkown scan code 0x08
button...........................|....
vrkiu: Unkown scan code 0x30
button...........................|....
vrkiu: Unkown scan code 0x30
button...........................|....
vrkiu: Unkown scan code 0x08
button...........................|....
vrkiu: Unkown scan code 0x08
button...........................|....
vrkiu: Unkown scan code 0x00
button...........................|....
vrkiu: Unkown scan code 0x00
button...........................|....
vrkiu: Unkown scan code 0x10
button...........................|....
vrkiu: Unkown scan code 0x10
button...........................|....
vrkiu: Unkown scan code 0x45
button...........................|....
vrkiu: Unkown scan code 0x45
button...........................|....
vrkiu: Unkown scan code 0x4d
button...........................|....
vrkiu: Unkown scan code 0x4d
button...........................|....
vrkiu: Unkown scan code 0x28
button...........................|....
vrkiu: Unkown scan code 0x28
button...........................|....
vrkiu: Unkown scan code 0x0f
button...........................|....
vrkiu: Unkown scan code 0x0f
button...........................|....
vrkiu: Unkown scan code 0x17
button...........................|....
vrkiu: Unkown scan code 0x17
button...........................|....
button...........................|.~