[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: SHARP Telios HC-AJ1
こんにちは。SonyCSLの西田です。
From: UCHIYAMA Yasushi <uch@nop.or.jp>
Subject: Re: SHARP Telios HC-AJ1
Date: Wed, 08 Dec 1999 01:50:32 +0900
Message-ID: <19991208015032B.uch@nop.or.jp>
uch> 最新のpbsdboot.exeと、ftp://f77.nop.or.jp/users/uch/netbsd.gz
uch> (TX3922用kernel)これで試してもらえるとうれしいです。
すばらしいです！ bootできました!
file systemをまだ作ってないのですが、CFもちゃんと見えています。
こんな感じです。
DRAM bank1: 4096 pages (16MByte) ...but not usable yet
Copyright (c) 1996, 1997, 1998, 1999
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 1.4P (TX3922) #15: Wed Dec 8 01:39:08 JST 1999
uch@anko:/work/netbsd/sys/arch/hpcmips/compile/TX3922
TOSHIBA TMPR3922 rev. 1.1
total memory = 16380 KB
avail memory = 13572 KB
using 230 buffers containing 920 KB of memory
mainbus0 (root)
cpu0 at mainbus0: cpu0: Toshiba TX3900 CPU Rev. 3.0 with software emulated floating point Rev. 0.0
cpu0: 16KB/16B Instruction 2-way set associative, 8KB/16B Data 2-way set associative, 64 TLB entries
txsim0 at mainbus0
tx39icu0 at txsim0
[Windows CE setting]
----+--------++-----------------[1 high]
.....................|.||.......[1 status] 10 8 7
.........||||...................[1 enable] 22 21 20 19
+---------+---------------------[2 high]
.....|.|........................[2 status] 26 24
|||||.||||......................[2 enable] 31 30 29 28 27 25 24 23 22
------------++++--------------++[3 high]
|.....||.||||.|.|||.|||.||.|....[3 status] 31 25 24 22 21 20 19 17 15 14 13 11 10 9 7 6 4
..|.|..............|............[3 enable] 29 27 12
------------++++--------------++[4 high]
......||.||||.|.||||||..||......[4 status] 25 24 22 21 20 19 17 15 14 13 12 11 10 7 6
..|.|.................|.........[4 enable] 29 27 9
-++---++----------++----+++----+[5 high]
..||......|.||..................[5 status] 29 28 21 19 18
|||....||.......................[5 enable] 31 30 29 24 23
------------+-+-----------------[7 high]
................................[7 status]
................................[7 enable]
--------------------------------[8 high]
.............|||..........|..|||[8 status] 18 17 16 5 2 1 0
.......||.|..........|.||.......[8 enable] 24 23 21 10 8 7
<--><LO> vector= 0 [6 status]
-------++-+--|..................[6 enable] 18
tx39power0 at txsim0
PWROK PWROKNMI ENSTPTIMER ENFORCESHUTDWN DBNCONBUTN PWRCS VCCON STPTIMERVAL=6
tx_intr_establish: 5:27(low)
tx_intr_establish: 5:26(low)
tx_intr_establish: 5:25(high)
tx_intr_establish: 5:24(high)
tx_intr_establish: 5:23(low)
tx_intr_establish: 5:22(low)
tx39clock0 at txsim0
tx39biu0 at txsim0
config0:ENDCLKOUTTRI ENRMAP1 ENWRINPAGE ENCS1USER CS3SIZE CS0SIZE
BANK0: 32bit DRAM/HDRAM ROW 22,23,21,19,17:9 COL 24,22,20,18,8:2
BANK1: 32bit DRAM/HDRAM ROW 22,23,21,19,17:9 COL 24,22,20,18,8:2
config3:ENCS0PAGE
config4:ENBANK1HDRAM ENBANK0HDRAM ENRFSH1 ENRFSH0
tx39io0 at txsim0
--------------------------------------------------------------
Debounce Direction DataOut DataIn PowerDown Select
--------------------------------------------------------------
IO 15: On Out 1 1 Down -
IO 14: On Out 0 0 Down -
IO 13: On Out 0 0 Down -
IO 12: On Out 0 0 Down -
IO 11: On Out 0 0 Down -
IO 10: Off In 0 1 Active -
IO 9: On Out 1 1 Down -
IO 8: Off In 0 0 Down -
IO 7: Off In 0 0 Down -
IO 6: Off In 0 0 Active -
IO 5: Off In 0 0 Active -
IO 4: On Out 0 0 Down -
IO 3: On Out 0 0 Active -
IO 2: On Out 0 0 Down -
IO 1: On Out 0 0 Down -
IO 0: Off In 0 1 Active -
--------------------------------------------------------------
MFIO 31: - Out 1 1 Active MFIO(CHIFS)
MFIO 30: - Out 0 0 Down CHICLK
MFIO 29: - In 0 0 Active MFIO(CHIDOUT)
MFIO 28: - In 0 0 Active MFIO(CHIDIN)
MFIO 27: - In 0 0 Active MFIO(DREQ)
MFIO 26: - Out 1 1 Active MFIO(DGRINT)
MFIO 25: - Out 0 0 Active BC32K
MFIO 24: - Out 0 0 Active TXD
MFIO 23: - In 0 1 Active RXD
MFIO 22: - Out 0 1 Active CS1
MFIO 21: - Out 0 1 Down CS2
MFIO 20: - Out 0 1 Active CS3
MFIO 19: - Out 0 1 Active MCS0
MFIO 18: - Out 0 1 Active MCS1
MFIO 17: - Out 0 1 Down RXPWR
MFIO 16: - Out 0 0 Down IROUT
MFIO 15: - SPICLK
MFIO 14: - Out 0 0 Down SPIOUT
MFIO 13: - Out 0 0 Down SPIN
MFIO 12: - In 0 0 Active MFIO(SIBMCLK)
MFIO 11: - Out 1 1 Down MFIO(CARDREG)
MFIO 10: - Out 0 0 Down MFIO(CARDIOWR)
MFIO 9: - In 0 1 Down MFIO(CARDIORD)
MFIO 8: - In 0 1 Active MFIO(CARD1CSL)
MFIO 7: - Out 0 0 Down MFIO(CARD1CSH)
MFIO 6: - Out 1 1 Down MFIO(CARD2CSL)
MFIO 5: - In 0 1 Active MFIO(CARD2CSH)
MFIO 4: - Out 1 1 Active MFIO(CARD1WAIT)
MFIO 3: - Out 1 1 Down MFIO(CARD2WAIT)
MFIO 2: - Out 1 1 Down MFIO(CARDDIR)
MFIO 1: - In 0 0 Active MCS1WAIT
MFIO 0: - In 0 0 Active MCS0WAIT
--------------------------------------------------------------
tx39uart0 at txsim0
txcom0 at tx39uart0 slot 0
txcom0: console
tx_intr_establish: 2:31(high)
txcom1 at tx39uart0 slot 1
tx_intr_establish: 2:21(high)
txcsbus0 at tx39biu0
m38813c0 at txcsbus0 iocs CARD1(io/attr) 16bit 0+0x8 irq1 103(3:7)
tx_intr_establish: 5:28(low)
skbd0 at m38813c0no keymap.
wskbd0 at skbd0 (mux 1 ignored for console): console keyboard
plum0 at txcsbus0 regcs CS3 32bit 0+0xffffffff iocs MCS0 32bit 0+0xffffffff memcs MCS1 32bit 0+0xffffffff irq1 277(8:21): Plum2 #2
plumicu0 at plum0tx_intr_establish: 8:21(low)
status:................................
ExtIO
status:................................
enable:................................
plumpower0 at plum0
power:USBEN IO5OE LCDOE EXTPW2 EXTPW1 IO5PWR BKLIGHT LCDPWR LCDDSP
clock:USBCLK1 IO5CLK PCCCLK2 PCCCLK1
MCS interface enebled
IO5 reset:
power:
clock:
MCS interface enebled
IO5 reset:
plumvideo0 at plum0
power:LCDOE LCDPWR LCDDSP
clock:
MCS interface enebled
IO5 reset:
power:LCDOE EXTPW2 LCDPWR LCDDSP
clock:
MCS interface enebled
IO5 reset:
power:LCDOE EXTPW2 EXTPW1 LCDPWR LCDDSP
clock:
MCS interface enebled
IO5 reset:
power:LCDOE EXTPW2 EXTPW1 BKLIGHT LCDPWR LCDDSP
clock:
MCS interface enebled
IO5 reset:
fb0 at plumvideo0: rasops 800x600 pixels, 65536 colors, 100x60 chars
wsdisplay0 at fb0
../../../../arch/hpcmips/dev/fb.c(471): fb_alloc_screen()
../../../../arch/hpcmips/dev/fb.c(507): fb_show_screen()
../../../../arch/hpcmips/dev/fb.c(471): fb_alloc_screen()
wsdisplay0: screen 0 added (std, vt100 emulation)
plumpcmcia0 at plum0
power:LCDOE EXTPW2 EXTPW1 BKLIGHT LCDPWR LCDDSP
clock:PCCCLK1
MCS interface enebled
IO5 reset:
pcmcia0 at plumpcmcia0
pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: SunDisk, SDP, 5/3 0.6
pcmcia0: Manufacturer code 0x45, product 0x401
pcmcia0: function 0: fixed disk, ccr addr 200 mask f
pcmcia0: function 0, config table entry 0: memory card; irq mask 0; memspace 0-7ff; maxtwins 1; powerdown
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; memspace 0-7ff; maxtwins 1; powerdown
pcmcia0: function 0, config table entry 2: I/O card; irq mask 4000; iomask a, iospace 1f0-1f7 3f6-3f7; memspace 0-7ff; maxtwins 1; powerdown
pcmcia0: function 0, config table entry 3: I/O card; irq mask 4000; iomask a, iospace 170-177 376-377; memspace 0-7ff; maxtwins 1; powerdown
pcmcia0: function 0, config table entry 7: I/O card; irq mask 4000; iomask a, iospace 170-177 376-377; memspace 0-7ff; maxtwins 1; powerdown
wdc0 at pcmcia0 function 0
plum_intr_establish: 0 (count=0)
wd0 at wdc0 channel 0 drive 0: <SunDisk SDCFB-48>
wd0: drive supports 1-sector pio transfers, lba addressing
wd0: 45MB, 734 cyl, 4 head, 32 sec, 512 bytes/sect x 93952 sectors
plum_intr_disestablish: 0 (count=0)
power:LCDOE EXTPW2 EXTPW1 BKLIGHT LCDPWR LCDDSP
clock:PCCCLK2 PCCCLK1
MCS interface enebled
IO5 reset:
pcmcia1 at plumpcmcia0
plumiobus0 at plum0
power:IO5OE LCDOE EXTPW2 EXTPW1 IO5PWR BKLIGHT LCDPWR LCDDSP
clock:IO5CLK PCCCLK2 PCCCLK1
MCS interface enebled
IO5 reset:
plum_intr_establish: 10 (count=0)
plum_intr_establish: 11 (count=1)
plum_intr_establish: 12 (count=2)
plum_intr_establish: 13 (count=3)
plum_intr_establish: 14 (count=4)
plum_intr_establish: 15 (count=5)
8bit port:
# of wait to become from the access begining: 1 clock
# of wait in access clock: [CS0:1] [CS1:1] [CS2:1] [CS3:1] [CS4:1]
# of wait during access by I/O bus : 1 clock
txisab0 at txcsbus0 iocs CARD1(io/attr) 16bit 0+0xffffffff irq1 103(3:7)
base=0x8000000 irq=103
isa0 at txisab0
iobus intr
iobus intr
boot device: wd0
root on wd0a dumps on wd0b
plum_intr_establish: 0 (count=6)
plum_intr_disestablish: 0 (count=6)
mountroot: trying ffs...
plum_intr_establish: 0 (count=6)
plum_intr_disestablish: 0 (count=6)
no file system for wd0 (dev 0x100)
cannot mount root, error = 79
root device (default wd0a):