20000627-1.5 (CX300 boot up)

[Hatano <wave@ann.hi-ho.ne.jp>]

 はたの です。


 Yahoo! オークションで INTERTOP CX300 を入手し、
snapshot/20000627-1.5 を入れてみました。

 diskless 環境でですが、無事 bootしました。

 公式サイトに CPU の クロック数(131.072MHz)が無かったので、
一応 dmesg を 付けておきます。



 表示が20000315と反転しているのは、
カラー液晶対応 ってことなんですね (^^)。

 モノクロ液晶向けに、(以前の様に)更に反転させるにはどうするのでしょうか?
 ( pbsdboot.exe の reverse video チェックしても黒地白字でした。)





Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.


NetBSD 1.5_ALPHA (GENERIC) #0: Sat Jul  1 02:05:42 JST 2000
    root@680g.naobsd.org:/usr/src/sys/arch/hpcmips/compile/GENERIC
Fujitsu INTERTOP IT300 (NEC VR4121 rev1.0 131.072MHz)
total memory = 32768 KB
avail memory = 27780 KB
using 435 buffers containing 1740 KB of memory
/usr/src/sys/arch/hpcmips/vr/vr.c(294): vr_bus_reset() not implemented.
mainbus0 (root)
cpu0 at mainbus0: NEC VR4100 CPU (0xc60) Rev. 6.0 with software emulated
floatin
g point Rev. 0.0
cpu0: L1 cache: 16KB/16B instruction, 8KB/16B data, direct mapped
cpu0: No L2 cache
cpu0: install VR specific idle routine
bivideo0 at mainbus0: pseudo video controller, console
hpcfb0 at bivideo0: hpcrasops 640x480 pixels, 256 colors, 80x48 chars: tvram
red
raw
wsdisplay0 at hpcfb0: console (std, vt100 emulation)
vrip0 at mainbus0
vrcmu0 at vrip0 addr 0xb000060-0xb00007f
vrgiu0 at vrip0 addr 0xb000100-0xb00011f intr 8
pwctl0 at vrgiu0 port=15 id=0 on=1
vrbcu0 at vrip0 addr 0xb000000-0xb00001f
vrbcu: cpu 131.072MHz, bus 32.768MHz, ram 32.768MHz
com0 at vrip0 addr 0xc000000-0xc000007 intr 9: ns16550a, working fifo
vrrtc0 at vrip0 addr 0xb0000c0-0xb0000df intr 2
vrkiu0 at vrip0 addr 0xb000180-0xb00019f intr 7
wskbd0 at vrkiu0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
vrpmu0 at vrip0 addr 0xb0000a0-0xb0000bf intr 1
vrdsu0 at vrip0 addr 0xb0000e0-0xb0000e7
vrpiu0 at vrip0 addr 0xb000120-0xb0002bf intr 5
wsmouse0 at vrpiu0 mux 0
vrisab2 at vrgiu0:ISA port 0x15000000-0x18000000 mem 0x10000000-0x20000000
isa2 at vrisab2
pcic0 at isa2 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 393219
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcmcia at pcic0 controller 1 socket 0 not configured
pcmcia at pcic0 controller 1 socket 1 not configured
btnmgr0 at mainbus0
wskbd1 at btnmgr0 mux 1
/usr/src/sys/arch/hpcmips/vr/vr.c(294): vr_bus_reset() not implemented.
pcic0: using irq 393219 for socket events
ne0 at pcmcia0 function 0 port 0x300-0x30f port 0x310-0x31f
ne0: I-O DATA PCLA/TE Ethernet
ne0: Ethernet address 00:1x:x5:x4:x1:x8
wdc1 at pcmcia1 function 0 port 0x15000400-0x1500040f
wd0 at wdc1 channel 0 drive 0: <SunDisk SDCFB-15>
wd0: drive supports 1-sector pio transfers, lba addressing
wd0: 14656 KB, 458 cyl, 2 head, 32 sec, 512 bytes/sect x 29312 sectors
boot device: wd0
root on ne0
nfs_boot: trying DHCP/BOOTP
pcmcia0: card irq 3
nfs_boot: DHCP server: 192.168.1.6
nfs_boot: my_name=kamakura
nfs_boot: my_domain=wave.lan
nfs_boot: my_addr=192.168.1.14
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.1.1
root on 192.168.1.6:/usr/CFLESS/KAMAKURA





D.HATANO
wave@ann.hi-ho.ne.jp
http://www.ann.hi-ho.ne.jp/wave/pbsd_hpcmips/