Victor MP-C303

[enami tsugutomo <enami@but-b.or.jp>]

Victor MP-C303 ですが, root on aue0 type nfs で multi user boot すると
ころまでの code を commit しました.  ただし, port-hpcmips@netbsd.org 
に post した <200106130742.f5D7gnn00860@parity-error.sm.sony.co.jp> に
載っている patch を uhub.c に当てないと, root hub の先が大抵見えません.

また, constant に usb error がでます.  それでも userland を self build 
するくらいはできました.

おそらく変なところはまだ沢山ありますが, mile stone ということで….

enami.

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

start = c0000000, end = c4118000, base = c0000000
NetBSD 1.5W (MPC303) #275: Wed Jun 13 15:26:12 JST 2001
    enami@enodev.sm.sony.co.jp:/a/cvs.netbsd.org/src/sys/arch/hpcmips/compile/MPC303
Victor InterLink MPC303 (NEC VR4122 rev0.3 180.633MHz)
total memory = 32768 KB
total memory banks = 2
memory bank 0 = 0x00000000 2648KB(0x00296000)
memory bank 1 = 0x00296000 30120KB(0x01d6a000)
avail memory = 27528 KB
using 435 buffers containing 1740 KB of memory
../../../../arch/hpcmips/vr/vr.c(307): vr_bus_reset() not implemented.
mainbus0 (root)
cpu0 at mainbus0: NEC VR4100 CPU (0xc70) Rev. 7.0 with software emulated floating point Rev. 0.0
cpu0: L1 cache: 32KB/16B instruction, 16KB/16B data, direct mapped
cpu0: No L2 cache
cpu0: install VR specific idle routine
vrip0 at mainbus0
vrbcu0 at vrip0 addr 0xf000000-0xf00001f
vrbcu0: cpu 180.633MHz, bus 30.105MHz, ram 60.211MHz
vrcmu0 at vrip0 addr 0xf000060-0xf00007f
vrcmu0: 0x3962<SIU,B5,CSI,SSIU,DSIU,SCSI,PCIU>
vrgiu0 at vrip0 addr 0xf000140-0xf00015f intr 8
WIN setting:                                iiiiiiiiiiiiiiiiiioooooiiioioIII
I/O setting:                                iiiiiiiiiiiiiiiiiioooooiiioioiii
       data:,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,....................|.|||..||.|.
com0 at vrip0 addr 0xf000800-0xf000807 intr 9: ns16550a, working fifo
com0: console
com0: pwctl 0
vrrtc0 at vrip0 addr 0xf000100-0xf00011f intr 2
vrpmu0 at vrip0 addr 0xf0000c0-0xf0000df intr 1
vrled0 at vrip0 addr 0xf000180-0xf00018f intr 17
vrpciu0 at vrip0 addr 0xf000c00-0xf000dff intr 22
pci0 at vrpciu0 bus 0
pci0: i/o space, memory space enabled, rd/line ok
vrc4173bcu0 at pci0 dev 19 function 0: NEC VRC4173 Bus Control Unit (rev. 0x00)
vrc4173cmu at vrc4173bcu0 not configured
vrc4173giu at vrc4173bcu0 not configured
vrc4173piu at vrc4173bcu0 not configured
vrc4173kiu at vrc4173bcu0 not configured
vrc4173aiu at vrc4173bcu0 not configured
vrc4173ps2u at vrc4173bcu0 not configured
vrc4173bcu0: interrupting at 0xc000cf20
NEC VRC4173 AC97 Unit (audio multimedia, revision 0x01) at pci0 dev 19 function 1 not configured
ohci0 at pci0 dev 19 function 2: NEC USB Host Controller (rev. 0x01)
ohci0: interrupting at vrc4173 intr 0
ohci0: iot = 0x8023ef20, ioh = 0xb0c02000
ohci0: powerreg = 0x00000000
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
NEC VRC4173 PC-Card Unit (CardBus bridge, revision 0x01) at pci0 dev 1 function 0 not configured
NEC VRC4173 PC-Card Unit (CardBus bridge, revision 0x01) at pci0 dev 2 function 0 not configured
MediaQ Inc. MQ200 (miscellaneous display, revision 0x02) at pci0 dev 18 function 0 not configured
bivideo0 at mainbus0: no frame buffer infomation.
btnmgr0 at mainbus0
wskbd0 at btnmgr0 mux 1
hpcapm0 at mainbus0: pseudo power management module
apmdev0 at hpcapm0: Power Management spec V1.2
../../../../arch/hpcmips/vr/vr.c(307): vr_bus_reset() not implemented.
md0: internal 0 image area
boot device: <unknown>
unknown device major 0xffffffff
root device (default md0a): sleep
aue0 at uhub0 port 1
aue0: I-O DATA DEVICE, INC I-O DATA USB-ET/TX, rev 1.10/1.01, addr 2
aue0: Ethernet address 00:a0:b0:15:52:18
ukphy0 at aue0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0010a9, model 0x0021, rev. 11
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
use one of: md0[a-h] aue0 halt reboot
root device (default md0a): aue0
dump device: 
file system (default nfs): nfs
root on aue0
nfs_boot: trying RARP (and RPC/bootparam)
nfs_boot: client_addr=43.11.135.100 (RARP from 43.11.135.11)
nfs_boot: server_addr=43.11.135.11
nfs_boot: hostname=mpc303.sm.sony.co.jp
nfs_boot: gateway=43.11.135.1
nfs_boot: my_mask=255.255.255.0
root on parity-error:/b/hpcmips
WARNING: preposterous clock chip time
 -- CHECK AND RESET THE DATE!
aue0: 1 usb errors on intr: IOERROR
aue0: 2 usb errors on intr: IOERROR
aue0: 1 usb errors on intr: IOERROR
aue0: 2 usb errors on intr: IOERROR