[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

PT-M01

 田村＠神戸大と申します。

 高木産業の PT-M01 にて NetBSD/hpcmips を
boot させてみたところ、 FreeStyle の設定で
boot し、 sysinst が立ち上がるところまで
起動しました。また、手持ちの CF カードを
抜き差ししてみたところ、挿抜は認識しているようでした。
本当に mount できるかどうかまでは試していません。

 最後に dmesg の結果を添付しておきます。
動作確認リストでは何故か空白でしたので、
埋めてあげて下さい。

=====
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5 (RAMDISK) #0: Sat Nov 18 19:46:04 JST 2000
    shin@touji:/u/obj/release/sys/arch/hpcmips/compile/RAMDISK
Everex Freestyle AXX (NEC VR4111 rev0.0 65.536MHz)
total memory = 16384 KB
avail memory = 8432 KB
using 230 buffers containing 920 KB of memory
/u/src/release/src/sys/arch/hpcmips/vr/vr.c(294): vr_bus_reset() not implemented.
mainbus0 (root)
cpu0 at mainbus0: NEC VR4100 CPU (0xc50) Rev. 5.0 with software emulated floating point Rev. 0.0
cpu0: L1 cache: 16KB/16B instruction, 8KB/16B data, direct mapped
cpu0: No L2 cache
cpu0: install VR specific idle routine
vrip0 at mainbus0
vrcmu0 at vrip0 addr 0xb000060-0xb00007f
vrgiu0 at vrip0 addr 0xb000100-0xb00011f intr 8
button0 at vrgiu0 port=9 id=9 active=high sense=edge
button1 at vrgiu0 port=10 id=10 active=high sense=edge
button2 at vrgiu0 port=11 id=11 active=high sense=edge
button3 at vrgiu0 port=12 id=12 active=high sense=edge
button4 at vrgiu0 port=7 id=2 active=high sense=edge
button5 at vrgiu0 port=4 id=3 active=high sense=edge
button6 at vrgiu0 port=6 id=1 active=high sense=edge
button7 at vrgiu0 port=5 id=4 active=high sense=edge
button8 at vrgiu0 port=1 id=5 active=high sense=edge
button9 at vrgiu0 port=20 id=7 active=high sense=edge
button10 at vrgiu0 port=8 id=8 active=high sense=edge
vrbcu0 at vrip0 addr 0xb000000-0xb00001f
vrbcu: cpu 65.536MHz, bus 21.845MHz, ram 21.845MHz
com0 at vrip0 addr 0xc000000-0xc000007 intr 9: ns16550a, working fifo
com0: console
vrrtc0 at vrip0 addr 0xb0000c0-0xb0000df intr 2
vrkiu0 at vrip0 addr 0xb000180-0xb00019f intr 7
wskbd0 at vrkiu0 mux 1
vrpmu0 at vrip0 addr 0xb0000a0-0xb0000bf intr 1
vrdsu0 at vrip0 addr 0xb0000e0-0xb0000e7
vrpiu0 at vrip0 addr 0xb000120-0xb0002bf intr 5
wsmouse0 at vrpiu0 mux 0
vrisab1 at vrgiu0:ISA port 0x15000000-0x18000000 mem 0x10000000-0x20000000
isa1 at vrisab1
pcic0 at isa1 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 1507331
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcmcia at pcic0 controller 1 socket 0 not configured
pcmcia at pcic0 controller 1 socket 1 not configured
bivideo0 at mainbus0: pseudo video controller
hpcfb0 at bivideo0: hpcrasops 320x240 pixels, 4 colors, 40x24 chars: tvram redraw
wsdisplay0 at hpcfb0
wsdisplay0: screen 0 added (std, vt100 emulation)
btnmgr0 at mainbus0
wskbd1 at btnmgr0 mux 1
hpcapm0 at mainbus0: pseudo power management module
apmdev0 at hpcapm0: Power Management spec V1.2
/u/src/release/src/sys/arch/hpcmips/vr/vr.c(294): vr_bus_reset() not implemented.
pcic0: using irq 1507331 for socket events
 fixed, 8192 blocksboot device: <unknown>
root on md0a dumps on md0b
WARNING: preposterous clock chip time
 -- CHECK AND RESET THE DATE!
root file system type: ffs
wdc1 at pcmcia0 function 0 port 0x15000400-0x1500040f
wdc1 detached
wdc1 at pcmcia0 function 0 port 0x15000400-0x1500040f
wd0 at wdc1 channel 0 drive 0: <SunDisk SDP3B-0>
wd0: drive supports 1-sector pio transfers, lba addressing
wd0: 0, 0 cyl, 2 head, 32 sec, 512 bytes/sect x 0 sectors
wd1 at wdc1 channel 0 drive 1: <ST506>
wd1: drive supports 1-sector pio transfers, chs addressing
wd1: 69632 KB, 1024 cyl, 8 head, 17 sec, 512 bytes/sect x 139264 sectors
=====

-----------------------------------------------------------------------
tam@math.sci.kobe-u.ac.jp