[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: InterLink MP-C304へのインストール



> 他の MP-C30[34] ユーザの方はどんな状況なんでしょう ?

303 では, 先の mail に書いたような option を GENERIC に追加すれば以下
のように boot できました.  素の source じゃないので変なものも出ていま
すが, そう大きな変更もしてない筈.

で, これ見ると boot 直後に ddb に入るのは dram の probe よりは先のよう
なので, とりあえず hpcboot の設定を変えて ddb に入れるかどうかを試して
みるのがいいんじゃないでしょうか.

enami.

--------HPCBOOT--------
sysinfo.dwPageSize = 4096
MemoryManager: LockPages
FileManager: FAT
[0] 0x80000000 size 0x04000000
GetVersionEx
Windows CE 3.0
GetSystemInfo:
wProcessorArchitecture      0x1
dwPageSize                  0x1000
dwAllocationGranularity     0x00010000
dwProcessorType             0xfa0
wProcessorLevel             0x4
wProcessorRevision          0xc70
Display: 800x600 16bpp
VR41
open file "\RSX 60D^\netbsd.gz"(1498830 byte).
Loader: ELF
file size: +0x28ffd0+[(symbol block: header 664 string 102290 symbol 111776 byte) = 0x346cc] = 0x2c46cc byte
address translation table 720 pages.(5760 byte)
allocated 720 page. mapped 720 page.
2nd bootloader vaddr=0x003cf000 paddr=0x01cfb000
2nd bootloader copy done.
[1] vaddr 0x80001000 file size 0x28ffd0 mem size 0x2e38d0
	->load 0x80001000+0x002e38d0=0x802e48d0 ofs=0x00001000+0x28ffd0
[zero clear] ->0x80290fd0+0x00053900=0x802e48d0
	->load 0x802e48d0+0x00000298=0x802e4b68
	->load 0x802e4b68+0x00018f92=0x802fdafa ofs=0x003af3d0+0x18f92
	->load 0x802fdafc+0x0001b4a0=0x80318f9c ofs=0x00393f30+0x1b4a0
load link 714 zero clear link 1.
kernel entry address: 0x80001000
framebuffer: 800x600 type=5 linebytes=0 addr=0x00000000
console = 2
jump to 0x81cfb000 (info=0x81cfa000, pvec=0x81a2c000)
ABStopped in pid 0 () at  cpu_Debugger+0x4:       jr      ra
                bdslot: nop
db> c
mem_cluster_cnt = 2
mem_clusters[0] = {0x0,0x31b000}
mem_clusters[1] = {0x31b000,0x1ce5000}
loading 0x31b000,0x1ce5000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

start = c0000000, end = d0ff8000, base = c0000000
NetBSD 1.6B (GENERIC) #36: Mon Jul  1 19:20:36 JST 2002
    enami@memory-leak.sm.sony.co.jp:/a/cvs.netbsd.org/src/sys/arch/hpcmips/compile/GENERIC
Victor InterLink MPC303 (NEC VR4122 rev0.3 180.633MHz)
total memory = 32768 KB
total memory banks = 2
memory bank 0 = 0x00000000 3180KB(0x0031b000)
memory bank 1 = 0x0031b000 29588KB(0x01ce5000)
avail memory = 26792 KB
using 435 buffers containing 1740 KB of memory
mainbus0 (root)
cpu0 at mainbus0: NEC VR4100 CPU (0xc70) Rev. 7.0 with software emulated floating point
cpu0: 32KB/16B direct-mapped L1 Instruction cache, 32 TLB entries
cpu0: 16KB/16B direct-mapped write-back L1 Data cache
vr4122ip0 at mainbus0
vrbcu0 at vr4122ip0 addr 0x0f000000-001f
vrbcu0: cpu 180.633MHz, bus 30.105MHz, ram 60.211MHz
vrcmu0 at vr4122ip0 addr 0x0f000060-007f
vrcmu0: 0x3962<SIU,B5,CSI,SSIU,DSIU,SCSI,PCIU>
vrgiu0 at vr4122ip0 addr 0x0f000140-015f
                                             3         2         1
                                            10987654321098765432109876543210
WIN setting:                                iiiiiiiiiiiiiiiiiioooooiiioioElE
I/O setting:                                iiiiiiiiiiiiiiiiiioooooiiioioiii
       data:....................................................|.|||..||.|.
hpcioman7 at vrgiu0
hpcin0 at hpcioman7 iochip vrgiu0, port 1, type 5, id 38912, interrupt level low
com0 at vr4122ip0 addr 0x0f000800-0807: ns16550a, working fifo
com0: console
com0: pwctl 0
vrrtc0 at vr4122ip0 addr 0x0f000100-011f
vrpmu0 at vr4122ip0 addr 0x0f0000c0-00df
vrled0 at vr4122ip0 addr 0x0f000180-018f
vrpciu0 at vr4122ip0 addr 0x0f000c00-0dff
pci0 at vrpciu0 bus 0
pci0: i/o space, memory space enabled, rd/line ok
vrc4173bcu0 at pci0 dev 19 function 0: NEC VRC4173 Bus Control Unit (rev. 0x00)
vrc4173bcu0: default clock mask is 1de3
vrc4173bcu0: interrupting at pciintr 0:19:0
vrkiu0 at vrc4173bcu0 addr 0x0100-011f
hpckbd0 at vrkiu0
wskbd0 at hpckbd0 mux 1
vrpiu0 at vrc4173bcu0 addr 0x00a0-00bf, 0x00c0-00df
wsmouse0 at vrpiu0 mux 0
NEC VRC4173 AC97 Unit (audio multimedia, revision 0x01) at pci0 dev 19 function 1 not configured
ohci0 at pci0 dev 19 function 2: NEC USB Host Controller (rev. 0x01)
ohci0: interrupting at pciintr 0:19:2
ohci0: iot = 0x80283e90, ioh = 0xb0c02000
ohci0: powerreg = 0x00000000
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
NEC VRC4173 PC-Card Unit (CardBus bridge, revision 0x01) at pci0 dev 1 function 0 not configured
NEC VRC4173 PC-Card Unit (CardBus bridge, revision 0x01) at pci0 dev 2 function 0 not configured
mqvideo0 at pci0 dev 18 function 0: no frame buffer information.
bivideo0 at mainbus0: no frame buffer information.
btnmgr0 at mainbus0
wskbd1 at btnmgr0 mux 1
hpcapm0 at mainbus0: pseudo power management module
apmdev0 at hpcapm0: Power Management spec V1.2
boot device: <unknown>
root device: