init: not found

[Junya KOBORI <jun_ya@kt.rim.or.jp>]

小堀です。

elfnt-20020119 をインストールし、一昨日あたりのソースコードを
とりよせて GENERIC カーネルを作ってみましたが、起動時に

>root file system type: ffs
>exec /sbin/init: error 8
>init: not found
>panic: init init
>Stopped in pid 1 (init) at   cpu_Debugger+0x6:     ulnk    a6
>db>

↑のように /sbin/init が見つけられなくて db> に落ちてしまいます。
esp.c は柴垣さんのパッチが当たっています。

正常に起動できたときの dmesg を書いておきます。

>[ using 423068 bytes of netbsd ELF symbol table ]
>Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
>    The NetBSD Foundation, Inc.  All rights reserved.
>Copyright (c) 1982, 1986, 1989, 1991, 1993
>    The Regents of the University of California.  All rights reserved.
>
>NetBSD 1.5ZA (GENERIC) #20: Sat Jan 19 19:11:27 PST 2002
>    root2@c610:/usr/src/sys/arch/mac68k/compile/GENERIC
>Apple Macintosh Quadra 840AV  (68040)
>cpu: delay factor 1280
>total memory = 128 MB
>avail memory = 114 MB
>using 1664 buffers containing 6656 KB of memory
>mrg: 'Quadra AV ROMs' ROM glue, tracing off, debug off, silent traps
>mrg: I/O map kludge for ROMs that use hardware addresses directly.
>mainbus0 (root)
>obio0 at mainbus0
>esp0 at obio0: address 0x89f000: NCR53C96, 25MHz, SCSI ID 7
>scsibus0 at esp0: 8 targets, 8 luns per target
>adb0 at obio0
>intvid0 at obio0 @ 50100800: CIVIC video subsystem
>intvid0: 640 x 480, monochrome
>macfb0 at intvid0
>wsdisplay0 at macfb0 (kbdmux ignored): console (std, vt100 emulation)
>mc0 at obio0: address 08:00:07:fc:9b:45
>zsc0 at obio0 chip type 0 
>zsc0 channel 0: d_speed   9600 DCD clk 0 CTS clk 0
>zstty0 at zsc0 channel 0
>zsc0 channel 1: d_speed   9600 DCD clk 0 CTS clk 0
>zstty1 at zsc0 channel 1
>nubus0 at mainbus0
>fpu0 at mainbus0 (mc68040)
>scsibus0: waiting 2 seconds for devices to settle...
>sd0 at scsibus0 target 0 lun 0: <QUANTUM, LPS540S, 590A> SCSI2 0/direct fixed
>sd0: 516 MB, 2740 cyl, 4 head, 96 sec, 512 bytes/sect x 1057616 sectors
>sd0: async, 8-bit transfers
>sd1 at scsibus0 target 2 lun 0: <IBM, DCAS-34330, S65A> SCSI2 0/direct fixed
>sd1: 4134 MB, 8205 cyl, 6 head, 171 sec, 512 bytes/sect x 8467200 sectors
>sd1: async, 8-bit transfers, tagged queueing
>cd0 at scsibus0 target 3 lun 0: <SONY, CD-ROM CDU-8003A, 1.9a> SCSI2 5/cdrom removable
>cd0: async, 8-bit transfers
>adb0 (direct, Cuda): 2 targets
>aed0 at adb0 addr 0: ADB Event device
>akbd0 at adb0 addr 2: keyboard II (Japanese layout)
>wskbd0 at akbd0 (mux ignored): console keyboard, using wsdisplay0
>ams0 at adb0 addr 3: 1-button, 100 dpi mouse
>wsmouse0 at ams0 (mux ignored)
>boot device: sd1
>root on sd1a dumps on sd1b
>PRAM: 0x3c57c69f, macos_boottime: 0x3c57c694.
>root file system type: ffs

何か解決方法(または調べるべき事柄)はありますでしょうか?

-- Junya KOBORI