Re: NetBSD/powermac root diskimage (980322)

[SUNAGAWA Keiki <Keiki_SUNAGAWA@yokogawa.co.jp>]

Tsubai Masanari <tsubai@iri.co.jp>  wrote:

Tsubai> ちょうど一カ月できりもいいので(何がだ)新しい root
Tsubai> image をつくってみました。いつものところにおいてあり
Tsubai> ます。

だいぶ長いことさぼっていましたが、ディスクの都合がついたので
連休の間に試してみました。


linuxppcでつばいさんの作成されたイメージをddで書いた後ブート
してみました。

0 > boot scsi/sd@1:0 
>> NetBSD/powerpc OpenFirmware Boot, Revision 1.3
>> (tsubai@yokyun, Sun Feb 22 23:33:42 JST 1998)
Booting scsi/sd@1/netbsd
927052@0x100000+98272@0x1e254c 
 start=0x100000
Copyright (c) 1996, 1997, 1998
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.3E (POWERMAC) #1: Sun Mar 22 21:37:49 JST 1998
    tsubai@powermac:/a/0321/src/sys/arch/powermac/compile/POWERMAC
CPU: 604ev (Revision 204)
real mem = 33554432
avail mem = 28766208
using 409 buffers containing 1675264 bytes of memory
mainbus0 (root)
cpu0 at mainbus0
pci0 at mainbus0 bus 0
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer product 0x0001 (rev. 0x03)
Apple Computer product 0x0007 (undefined subclass 0x00, revision 0x01) at pci0 dev 16 function 0 not configured
grfati0 at pci0 dev 17 function 0
Digital Equipment DECchip 21052 PCI-PCI Bridge (PCI bridge, revision 0x01) at pci0 dev 20 function 0 not configured
pci1 at mainbus0 bus 0
pci1: i/o enabled, memory enabled
unknown vendor 0x0001 product 0x0000 (miscellaneous prehistoric, revision 0x09) at pci1 dev 0 function 0 not configured
unknown vendor 0x0002 product 0x0000 (miscellaneous prehistoric, revision 0x0a) at pci1 dev 1 function 0 not configured
unknown vendor 0x0004 product 0x0000 (miscellaneous prehistoric, revision 0x0c) at pci1 dev 2 function 0 not configured
unknown vendor 0x0008 product 0x0000 (miscellaneous prehistoric, revision 0x08) at pci1 dev 3 function 0 not configured
unknown vendor 0x0010 product 0x0000 (miscellaneous prehistoric, revision 0x18) at pci1 dev 4 function 0 not configured
unknown vendor 0x0020 product 0x0000 (miscellaneous prehistoric, revision 0x28) at pci1 dev 5 function 0 not configured
unknown vendor 0x0040 product 0x0000 (miscellaneous prehistoric, revision 0x48) at pci1 dev 6 function 0 not configured
unknown vendor 0x0080 product 0x0000 (miscellaneous prehistoric, revision 0x88) at pci1 dev 7 function 0 not configured
unknown vendor 0x0100 product 0x0000 (miscellaneous prehistoric, interface 0x01, revision 0x08) at pci1 dev 8 function 0 not configured
unknown vendor 0x0200 product 0x0000 (miscellaneous prehistoric, interface 0x02, revision 0x08) at pci1 dev 9 function 0 not configured
unknown vendor 0x0400 product 0x0000 (miscellaneous prehistoric, interface 0x04, revision 0x08) at pci1 dev 10 function 0 not configured
unknown vendor 0x0800 product 0x0000 (miscellaneous prehistoric, interface 0x08, revision 0x08) at pci1 dev 11 function 0 not configured
Symbios Logic product 0x0000 (miscellaneous prehistoric, interface 0x10, revision 0x08) at pci1 dev 12 function 0 not configured
unknown vendor 0x2000 product 0x0000 (miscellaneous prehistoric, interface 0x20, revision 0x08) at pci1 dev 13 function 0 not configured
unknown vendor 0x4000 product 0x0000 (miscellaneous prehistoric, interface 0x40, revision 0x08) at pci1 dev 14 function 0 not configured
unknown vendor 0x8000 product 0x0000 (miscellaneous prehistoric, interface 0x80, revision 0x08) at pci1 dev 15 function 0 not configured
boot device: <unknown>
root device: 

この最後の行でカーソルが素早く点滅したまま入力を受け付けなく
なります。

この後一度だけですが端末のmac68kマシンが入力が溢れたというよ
うなメッセージを出してpanicしましたので、何か出力は出ている
ようです。

手元に残っていたカーネルをvnconfigでマウントしたイメージに書
き込んでブートしようとしてみましたが、Can't LOAD this
device(たしか)というメッセージが出てブートできませんでした。
この場合はブートローダを入れ直さなければならないのでしょうか?

--
SUNAGAWA Keiki <Keiki_SUNAGAWA@yokogawa.co.jp>
Happy Hacking!