Re: iBook

[SUNAGAWA Keiki <kei_sun@ba2.so-net.ne.jp>]

Tsubai Masanari <tsubai@iri.co.jp> wrote:

Tsubai> ソースから読むかぎりでは dev/func/reg のシフト量が 
Tsubai> bandit と同じだし、アドレスも同じみたいですからね。

bandit.cのpci106のところを潰してもう一度試してみましたが、や
はりbanditと同じでした>坂本さん

Tsubai> で、どこまでできそうですか? :-)

できるかどうかは分かりませんが、何とかroot partitionをマウン
トさせたいですね。

#どちらにしても今度のJNUGの会合か、その前には持っていきます。

現状のboot logです。

カーネルの設定ファイルでadbを有効にすると、via-pmuの部分が以
下のように変わりますが、aedやamsなどがない状態でもキー入力が
できなくなります。

< via-pmu at obio0 offset 0x16000 not configured
> adb0 at obio0 offset 0x16000 irq 25: 0 targets

start=0x10000
console keyboard type: USB
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of Calivornia.  All rights reserved.

NetBSD 1.4P (IBOOK) #25: Tue Jan 11 23:42:14 JST 2000
    kei@azarin:/a/anoncvs/netbsd/src/sys/arch/macppc/compile/IBOOK
CPU: 750 (Revision 8300)
total memory = 32768 KB
avail memory = 25916 KB
using 435 buffers containing 1740 KB of memory
mainbus0 (root)
cpu0 at mainbus0: 512KB backside cache enabled
pci0 at mainbus0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer product 0x0020 (rev. 0x00)
ofb0 at pci0 dev 16 function 0: ATI Technologies product 0x4c4e
ofb0: 800 x 600, 8bpp
wsdisplay0 at ofb0: console (std, vt100 emulation)
pci1 at mainbus0 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer product 0x001f (rev. 0x00)
obio0 at pci1 dev 23 function 0: addr 0x80000000
interrupt-controller at obio0 offset 0x40000 not configured
gpio at obio0 offset 0x50 not configured
i2s at obio0 offset 0x10000 not configured
escc-legacy at obio0 offset 0x12000 not configured
zsc0 at obio0 offset 0x13000: irq 22,50
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
timer at obio0 offset 0x15000 not configured
via-pmu at obio0 offset 0x16000 not configured
battery at obio0 offset 0x0 not configured
backlight at obio0 offset 0xf300 not configured
i2c at obio0 offset 0x18000 not configured
wdc0 at obio0 offset 0x1f000 irq 19
wd0 at wdc0 channel 0 drive 0: <FUJITSU MHH2032AT>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 3104MB, 6307 cyl, 16 head, 63 sec, 512 bytes/sect x 6357456 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wdc1 at obio0 offset 0x20000 irq 20
atapibus0 at wdc1 channel 0
cd0 at atapibus0 drive 0: <MATSHITA CR-175, , 5AAE> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
wdc2 at obio0 offset 0x21000 irq 21
ohci0 at pci1 dev 24 function 0: Apple Computer product 0x0019 (rev. 0x00)
pci_intr_map: no mapping for pin D
ohci0: couldn't map interrupt
ohci1 at pci1 dev 25 function 0: Apple Computer product 0x0019 (rev. 0x00)
pci_intr_map: no mapping for pin D
ohci1: couldn't map interrupt
pci2 at mainbus0 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: Apple Computer product 0x0021 (ethernet network) at pci2 dev 15 function 0 not configured
in6_ifattach_getifid: failed to get EUI64boot device: <unknown>
root device: _