G4 (Re: iBook)

[Tsubai Masanari <tsubai@iri.co.jp>]

single user まで来ました。

# 割り込みまわり、結構あっさり動きました。けどコードが汚すぎるので
# ちょっとまって > すながわさん、その他

↓では root on de0 ですが、wd0 にすると一瞬で no file system って
  言いますから、うごくと思います。

Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4P (G4) #63: Fri Jan 21 13:25:39 JST 2000
    tsubai@kanea:/a/0108/src/sys/arch/macppc/compile/G4
CPU: Version c (Revision 207)
total memory = 256 MB
avail memory = 231 MB
using 2867 buffers containing 13208 KB of memory
mainbus0 (root)
cpu0 at mainbus0
pci0 at mainbus0 bus 0
pci0: i/o space, memory space enabled
Apple Computer product 0x0020 (host bridge) at pci0 dev 11 function 0 not configured
ofb0 at pci0 dev 16 function 0: ATI Technologies product 0x5046
ofb0: 1600 x 1024, 8bpp
wsdisplay0 at ofb0
pci1 at mainbus0 bus 0
pci1: i/o space, memory space enabled
Apple Computer product 0x001f (host bridge) at pci1 dev 11 function 0 not configured
ppb0 at pci1 dev 13 function 0: Digital Equipment DECchip 21154 PCI-PCI Bridge (rev. 0x05)
pci2 at ppb0 bus 1
pci2: i/o space, memory space enabled
de0 at pci2 dev 4 function 0
de0: interrupting at irq 54
de0: 21140A [10-100Mb/s] pass 2.2
de0: address 00:40:05:a7:59:23
obio0 at pci2 dev 7 function 0: addr 0x80000000
interrupt-controller at obio0 offset 0x40000 not configured
gpio at obio0 offset 0x50 not configured
escc-legacy at obio0 offset 0x12000 not configured
zsc0 at obio0 offset 0x13000: irq 22,50
zstty0 at zsc0 channel 0 (console)
zstty1 at zsc0 channel 1
davbus at obio0 offset 0x14000 not configured
timer at obio0 offset 0x15000 not configured
via-pmu at obio0 offset 0x16000 not configured
i2c at obio0 offset 0x18000 not configured
wdc0 at obio0 offset 0x1f000 irq 19
wd0 at wdc0 channel 0 drive 0: <WDC WD273BA>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 26105MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 53464320 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wdc1 at obio0 offset 0x20000 irq 20
atapibus0 at wdc1 channel 0
cd0 at atapibus0 drive 0: <MATSHITAPD-2 LF-D110, , A110> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
sd0 at atapibus0 drive 1: <IOMEGA  ZIP 100       ATAPI, , 14.A> type 0 direct removable
sd0: drive offline
wdc2 at obio0 offset 0x21000 irq 21
ohci0 at pci2 dev 8 function 0: Apple Computer product 0x0019 (rev. 0x00)
ohci0: interrupting at irq 27
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci2 dev 9 function 0: Apple Computer product 0x0019 (rev. 0x00)
ohci1: interrupting at irq 28
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
Texas Instruments product 0x8019 (Firewire serial bus, interface 0x10) at pci2 dev 10 function 0 not configured
boot device: <unknown>
root device: de0
dump device: 
file system (default generic): 
nfs_boot: trying DHCP/BOOTP
nfs_boot: BOOTP server: 10.9.1.1
nfs_boot: my_addr=10.9.1.7
nfs_boot: my_mask=255.255.255.0
root on kanea:/export/g4
root file system type: nfs
/etc/rc: Can't open /etc/rc
Jan 21 04:30:38 init: /etc/pwd.db: No such file or directory
Enter pathname of shell or RETURN for sh: 
# ls
ls: not found
# echo *
bin dev netbsd sbin
#