[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: iBook, no screens found (Re: X)

Subject: Re: iBook, no screens found (Re: X)
From: 藤原誠Makoto Fujiwara<makoto@ki.nu>
To: port-powerpc-ja@jp.netbsd.org
Date: Sun, 22 Oct 2000 22:18:11 +0900
Message-Id: <20001022221811L.makoto@ki.nu>
In-Reply-To: <E13nJjJ-0007Lr-00@ruri.iri.co.jp>
References: <20001022143218M.makoto@ki.nu><E13nJjJ-0007Lr-00@ruri.iri.co.jp>
Delivered-To: mailing list port-powerpc-ja@jp.netbsd.org
Mailing-List: contact port-powerpc-ja-help@jp.netbsd.org; run by ezmlm-idx

>                                            千葉市中央区長洲
>                                                    藤原  誠
椿井さん、いつもありがとうございます。

tsubai> マニュアルを読んでほしいなあと思いますが、
はい、申訳けありません。どこを読めばいいかも分っていないのですが、
どこかにある、ことが分ったので探します。

/etc/XF86Config を添付 1 のように変更したのですが、そうして、
かなり進んだと思うのですが、まだうまく行っていません。
/var/log/XFree86.0.log を添付 2 に付けておきます。
---
(藤原)

--- /etc/XF86Config	2000/10/22 04:56:15	1.1
+++ /etc/XF86Config	2000/10/22 13:11:42
@@ -86,9 +86,10 @@
 # **********************************************************************
 
 Section "Device"
-    Identifier	"Rage128 Pro"
-    Driver	"r128"
+    Identifier	"Mach64 LN"
+    Driver	"ati"
     BusID	"PCI:0:16:0"
+    Option	"noaccel"
 EndSection
 
 # **********************************************************************
@@ -97,25 +98,25 @@
 
 Section "Screen"
     Identifier		"Screen1"
-    Device		"Rage128 Pro"
+    Device		"Mach64 LN"
     Monitor		"Generic Monitor"
 
 # XXX 24bpp may be broken
 
-    DefaultDepth	16
+    DefaultDepth	 8
 #   DefaultDepth	24
 
     SubSection "Display"
 	Depth		8
-	Modes		"1280x1024"
+	Modes		"800x600"
     EndSubSection
     SubSection "Display"
 	Depth		16
-	Modes		"1280x1024"
+	Modes		"800x600"
     EndSubSection
     SubSection "Display"
 	Depth		24
-	Modes		"1280x1024"
+	Modes		"800x600"
     EndSubSection
 EndSection


XFree86 Version 4.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 1 July 2000
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: NetBSD/macppc 1.5E [ELF] The NetBSD Foundation, Inc.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 22 22:07:49 2000
(==) Using config file: "/etc/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (??) unknown.
(==) ServerLayout "Main Layout"
(**) |-->Screen "Screen1" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "Mach64 LN"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "Protocol" "wskbd"
(**) Option "Device" "/dev/wskbd0"
(**) Keyboard: Protocol: wskbd
(**) Option "AutoRepeat" "500 5"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "macusb"
(**) XKB: model: "macusb"
(**) Option "XkbLayout" "jp"
(**) XKB: layout: "jp"
(**) Option "XkbVariant" "altjp"
(**) XKB: variant: "altjp"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) Option "PciType" "UniNorth"
(**) Option "BlankTime" "10"
(**) Option "StandbyTime" "20"
(**) Option "SuspendTime" "30"
(**) Option "OffTime" "60"
(--) Using wscons driver (/dev/ttyE0)
(**) PCI-HOST bridge is UniNorth
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:0b:0: chip 106b,0020 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:10:0: chip 1002,4c4e card 0000,0000 rev 64 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(--) PCI: (0:16:0) ATI Mach64 LN rev 100, Mem @ 0x91000000/24, 0x90000000/12, I/O @ 0x0400/8
(II) Addressable bus resource ranges are
	[0] -1	0x00000000 - 0xffffffff (0x0) MXB
	[1] -1	0x00000000 - 0x0000ffff (0x10000) IXB
(II) OS-reported resource ranges:
(II) Active PCI resource ranges:
	[0] -1	0x90020000 - 0x9003ffff (0x20000) MXB(B)
	[1] -1	0x90000000 - 0x90000fff (0x1000) MXB(B)
	[2] -1	0x91000000 - 0x91ffffff (0x1000000) MXB(B)
	[3] -1	0x00000400 - 0x000004ff (0x100) IXB(B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0x90020000 - 0x9003ffff (0x20000) MXB(B)
	[1] -1	0x90000000 - 0x90000fff (0x1000) MXB(B)
	[2] -1	0x91000000 - 0x91ffffff (0x1000000) MXB(B)
	[3] -1	0x00000400 - 0x000004ff (0x100) IXB(B)
(II) OS-reported resource ranges after removing overlaps with PCI:
(II) All system resource ranges:
	[0] -1	0x90020000 - 0x9003ffff (0x20000) MXB(B)
	[1] -1	0x90000000 - 0x90000fff (0x1000) MXB(B)
	[2] -1	0x91000000 - 0x91ffffff (0x1000000) MXB(B)
	[3] -1	0x00000400 - 0x000004ff (0x100) IXB(B)
(II) ATI: ATI driver (version 5.3.5) for chipsets: ati, ativga
(II) r128: Driver for ATI Rage 128 chipset: ATI Rage 128 RE (PCI),
	ATI Rage 128 RF (AGP), ATI Rage 128 RK (PCI), ATI Rage 128 RL (AGP),
	ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
	ATI Rage 128 Mobility LF (AGP)
(II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525,
	ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,
	ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
	mga2164w AGP, mgag100, mgag200, mgag200 PCI, mgag400
(II) FBDev: driver for framebuffer: fbdev, afb
inw(0x42e8) at line 352 in atiprobe.c
outw(0x42e8, 0x9000) at line 356 in atiprobe.c
outw(0x42e8, 0x500f) at line 358 in atiprobe.c
inw(0x92e8) at line 361 in atiprobe.c
outw(0x92e8, 0x5a5a) at line 362 in atiprobe.c
inw(0x9ae8) at line 363 in atiprobe.c
inw(0x92e8) at line 364 in atiprobe.c
outw(0x92e8, 0x0) at line 375 in atiprobe.c
outw(0x42e8, 0x0) at line 380 in atiprobe.c
ATIMach64Probe IOBase = 2ec, type 0
ATIMach64Probe IOBase = 1cc, type 0
ATIMach64Probe IOBase = 1c8, type 0
ATIMach64Probe IOBase = 400, type 1
inl(0x4a0) at line 500 in atiprobe.c
outl(0x4a0, 0x800000) at line 507 in atiprobe.c
inl(0x4d0) at line 510 in atiprobe.c
outl(0x4d0, 0x100) at line 513 in atiprobe.c
outl(0x4d0, 0x0) at line 514 in atiprobe.c
outl(0x4d0, 0x100) at line 515 in atiprobe.c
inl(0x480) at line 519 in atiprobe.c
outl(0x480, 0x55555555) at line 522 in atiprobe.c
inl(0x480) at line 523 in atiprobe.c
outl(0x480, 0x0) at line 542 in atiprobe.c
outl(0x4d0, 0x0) at line 547 in atiprobe.c
outl(0x4a0, 0x0) at line 548 in atiprobe.c
ATIMach64Probe IOBase = 400, type 1
inl(0x4a0) at line 500 in atiprobe.c
outl(0x4a0, 0x800000) at line 507 in atiprobe.c
inl(0x4d0) at line 510 in atiprobe.c
outl(0x4d0, 0x100) at line 513 in atiprobe.c
outl(0x4d0, 0x0) at line 514 in atiprobe.c
outl(0x4d0, 0x100) at line 515 in atiprobe.c
inl(0x480) at line 519 in atiprobe.c
outl(0x480, 0x55555555) at line 522 in atiprobe.c
inl(0x480) at line 523 in atiprobe.c
outl(0x480, 0x0) at line 542 in atiprobe.c
outl(0x4d0, 0x0) at line 547 in atiprobe.c
outl(0x4a0, 0x0) at line 548 in atiprobe.c
(WW) ATI:  PCI Mach64 in slot 0:16:0 could not be detected!
 See README.ati for details.
(EE) No devices detected.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".

Follow-Ups:
- Re: iBook, no screens found (Re: X)
  - From: you@nightbreak.org (Y. Takizawa)
- Re: iBook, no screens found (Re: X)
  - From: Tsubai Masanari <tsubai@iri.co.jp>

References:
- iBook, no screens found (Re: X)
  - From: 藤原誠Makoto Fujiwara<makoto@ki.nu>
- Re: iBook, no screens found (Re: X)
  - From: Tsubai Masanari <tsubai@iri.co.jp>

Prev by Date: Re: iBook, no screens found (Re: X)
Next by Date: Re: iBook, no screens found (Re: X)
Prev by thread: Re: iBook, no screens found (Re: X)
Next by thread: Re: iBook, no screens found (Re: X)
Index(es):
- Date
- Thread