PowerBook G4

[Tsubai Masanari <tsubai@iri.co.jp>]

てな感じです。ADB は例のパッチが必要みたい。

ところで CPU のバージョン番号(pvrの値)の一覧なんてないものでしょうか。

NetBSD 1.5S (PBG4) #2: Wed Mar  7 20:58:32 JST 2001
    tsubai@cube:/a/0305/src/sys/arch/macppc/compile/PBG4
total memory = 128 MB
avail memory = 111 MB
using 1664 buffers containing 6656 KB of memory
mainbus0 (root)
cpu0 at mainbus0: Version ffff800c (Revision 1103), ID 0 (primary)
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Interface (rev. 0x00)
ofb0 at pci0 dev 16 function 0: ATI Technologies Mobility M3 (AGP)
ofb0: 1152 x 768, 8bpp
wsdisplay0 at ofb0: console (std, vt100 emulation)
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
obio0 at pci1 dev 23 function 0: addr 0x80000000
gpio0 at obio0
gpio1 at gpio0 irq 47
programmer-switch at gpio0 not configured
firewire-linkon at gpio0 not configured
zsc0 at obio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
davbus at obio0 offset 0x14000 not configured
adb0 at obio0 offset 0x16000 irq 25: 0 targets
battery at obio0 offset 0x0 not configured
backlight at obio0 offset 0xf300 not configured
wdc0 at obio0 offset 0x1f000 irq 19: DMA transfer
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK1016GAP>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9590 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 19640880 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wdc1 at obio0 offset 0x20000 irq 20: DMA transfer
atapibus0 at wdc1 channel 0
cd0 at atapibus0 drive 0: <MATSHITADVD-ROM SR-8187, , HA15> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wdc2 at obio0 offset 0x21000 irq 21: DMA transfer
radio at obio0 offset 0x30000 not configured
ohci0 at pci1 dev 24 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
ohci0: interrupting at irq 27
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
ohci1: interrupting at irq 28
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
cbb0 at pci1 dev 26 function 0: Texas Instruments PCI1211 PCI-CardBus Bridge (rev. 0x00)
cbb0: interrupting at irq 58
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
fwohci0 at pci2 dev 14 function 0: Apple Computer product 0x0018 (rev. 0x01)
fwohci0: interrupting at irq 40
fwohci0: OHCI 1.0, 00:30:65:ff:fe:d6:01:96, 400Mb/s, 2048 max_rec, 4 iso_ctx
fw0 at fwohci0: 00:30:65:ff:fe:d6:01:96:0a:02:20:00:00:00:00:00
gm0 at pci2 dev 15 function 0: Ethernet address 00:30:65:d6:01:96
gm0: interrupting at irq 41
ukphy0 at gm0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x001018, model 0x001e, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
boot device: gm0
root on gm0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP server: 10.9.5.1
nfs_boot: my_addr=10.9.5.73
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=10.9.5.1
root on mirei-tlp1:/export/parla
root file system type: nfs