[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
PowerMac G5
いまさらですけど。
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 2.0G (ELINOR) #1: Sat Sep 18 05:22:58 JST 2004
tsubai@margaret:/a/G5/src/sys/arch/macppc/compile/ELINOR
total memory = 512 MB
avail memory = 473 MB
bootpath: /ht@0,f2000000/pci@6/ethernet@f
mainbus0 (root)
cpu0 at mainbus0: 970 (Revision 202), ID 0 (primary)
cpu0: HID0 0
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer product 0x004b (rev. 0x00)
Nvidia Corporation GeForce FX 5200 Ultra (VGA display, revision 0xa1) at pci0 dev 16 function 0 not configured
ht0 at mainbus0
pci1 at ht0 bus 0
pci1: i/o space, memory space enabled
ppb0 at pci1 dev 1 function 0: Advanced Micro Devices AMD8131 PCI-X Tunnel (rev. 0x12)
pci2 at ppb0 bus 6
pci2: i/o space, memory space enabled
ppb1 at pci1 dev 2 function 0: Advanced Micro Devices AMD8131 PCI-X Tunnel (rev. 0x12)
pci3 at ppb1 bus 7
pci3: i/o space, memory space enabled
ppb2 at pci1 dev 3 function 0: Apple Computer product 0x0045 (rev. 0x00)
pci4 at ppb2 bus 1
pci4: i/o space, memory space enabled
obio0 at pci4 dev 7 function 0: addr 0x80000000
mpic at obio0 offset 0x40000 not configured
zsc0 at obio0 offset 0x13000: irq 22,6,23,8
zstty0 at zsc0 channel 0 (console)
zstty1 at zsc0 channel 1
i2s at obio0 offset 0x10000 not configured
adb0 at obio0 offset 0x16000 irq 25: 0 targets
fans at obio0 offset 0x4c not configured
ohci0 at pci4 dev 8 function 0: Apple Computer product 0x0040 (rev. 0x00)
ohci0: interrupting at irq 27
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci4 dev 9 function 0: Apple Computer product 0x0040 (rev. 0x00)
ohci1: interrupting at irq 28
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ppb3 at pci1 dev 4 function 0: Apple Computer product 0x0046 (rev. 0x00)
pci5 at ppb3 bus 2
pci5: i/o space, memory space enabled
ohci2 at pci5 dev 11 function 0: NEC USB Host Controller (rev. 0x43)
ohci2: interrupting at irq 63
ohci2: OHCI version 1.0
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ohci3 at pci5 dev 11 function 1: NEC USB Host Controller (rev. 0x43)
ohci3: interrupting at irq 63
ohci3: OHCI version 1.0
usb3 at ohci3: USB revision 1.0
uhub3 at usb3
uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci5 dev 11 function 2: NEC USB Host Controller (rev. 0x04)
ehci0: interrupting at irq 63
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci2 ohci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 5 ports with 5 removable, self powered
ppb4 at pci1 dev 5 function 0: Apple Computer product 0x0047 (rev. 0x00)
pci6 at ppb4 bus 3
pci6: i/o space, memory space enabled
wdc0 at pci6 dev 13 function 0: interrupting at irq 39
atabus0 at wdc0 channel 0
fwohci0 at pci6 dev 14 function 0: Apple Computer product 0x0042 (rev. 0x00)
fwohci0: interrupting at irq 40
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:0a:95:ff:fe:a6:21:b6
fwohci0: invalid speed 7 (fixed to 3).
fwohci0: Phy 1394a available S800, 3 ports.
fwohci0: Link S800, max_rec 4096 bytes.
firewire0 at fwohci0: IEEE1394(FireWire) bus
fwe0 at firewire0: Ethernet over FireWire
fwe0: Fake Ethernet address: 02:0a:95:a6:21:b6
sbp0 at firewire0: SBP-2/SCSI over FireWire
fwip0 at firewire0: IP over FireWire
fwohci0: Initiate bus reset
ppb5 at pci1 dev 6 function 0: Apple Computer product 0x0048 (rev. 0x00)
pci7 at ppb5 bus 4
pci7: i/o space, memory space enabled
gm0 at pci7 dev 15 function 0: Ethernet address 00:0a:95:a6:21:b6
gm0: interrupting at irq 41
ukphy0 at gm0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x001018, model 0x002e, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb6 at pci1 dev 7 function 0: Apple Computer product 0x0049 (rev. 0x00)
pci8 at ppb6 bus 5
pci8: i/o space, memory space enabled
ServerWorks product 0x0240 (IDE mass storage, interface 0x8f) at pci8 dev 12 function 0 not configured
ServerWorks product 0x0240 (IDE mass storage, interface 0x85) at pci8 dev 12 function 1 not configured
fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <SONY DVD RW DW-U10A, EAAAA803, A43h> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
boot device: <unknown>
root device: gm0
dump device:
file system (default generic):
root on gm0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 192.168.253.1
nfs_boot: my_addr=192.168.253.21
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.253.1
root on erika:/e/macppc
root file system type: nfs
init path (default /sbin/init):
init: trying /sbin/init
Enter pathname of shell or RETURN for /bin/sh:
# echo *
a altroot bin dev etc home mnt netbsd netbsd.bak root sbin stand sys tmp usr var
# reboot
Sep 18 12:36:25 reboot: rebooted by root
syncing disks... done
rebooting
と、これぐらいは動くようになりました。
# これで安心して寝られる…。