New PowerBook G4

[Kouichirou Hiratsuka <hira@po6.nsk.ne.jp>]

平塚です。
ここへの投稿は初めてになります。以後よろしくお願いします。

PowerBook G4 12" 1.5GHz にインストールしてみました。
(2.0 CD では何故かブートできず、藤原さんの snapshot から)

早速ですが、本体の Trackpad が使えません(-current & snapshot)。
それらしきデバイスは見えていますが、uhid に attach されています。
過去記事には無かったように見えましたが、既知の問題でしょうか?
--
 Kouichirou Hiratsuka
   hira@po6.nsk.ne.jp

20050122 snapshot の dmesg:
NetBSD 2.99.14 (GENERIC) #0: Wed Feb  2 13:43:00 JST 2005
	root@mini:/export/20050122/checkout/src/sys/arch/macppc/compile/GENERIC
total memory = 768 MB
avail memory = 732 MB
bootpath: /pci@f4000000/ata-6@d/disk@0
mainbus0 (root)
cpu0 at mainbus0: 7447B (Revision 102), ID 0 (primary)
cpu0: HID0 8410c1bc<TBEN,DPM,ICE,DCE,XBSEN,SGE,BTIC,LRSTK,FOLD,BHT>
cpu0: HID1 8040ec80<EMCP,DFS2,PC1,PC2,PC3,SYNCBE,ABE>
cpu0: 512KB on-chip L2 cache
nvram0 at mainbus0: addr 0xfff04000, size 0x4000
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00)
ofb0 at pci0 dev 16 function 0: Nvidia product 0x0329
ofb0: 1024 x 768, 8bpp
wsdisplay0 at ofb0 (kbdmux ignored): console (std, vt100 emulation)
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
Broadcom product 0x4320 (miscellaneous network, revision 0x03) at pci1 dev 18 function 0 not configured
obio0 at pci1 dev 23 function 0: addr 0x80000000
zsc0 at obio0 offset 0x13000: irq 22,6,23,8
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
i2s at obio0 offset 0x0 not configured
adb0 at obio0 offset 0x16000 irq 47: 2 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: PowerBook G3 keyboard
wskbd0 at akbd0 (mux ignored): console keyboard, using wsdisplay0
abtn0 at adb0 addr 7: brightness/volume button
battery0 at obio0 offset 0x0
wdc0 at obio0 offset 0x20000 irq 24
atabus0 at wdc0 channel 0
ohci0 at pci1 dev 24 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
ohci0: can't map mem space
ohci1 at pci1 dev 25 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
ohci1: can't map mem space
ohci2 at pci1 dev 26 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
ohci2: interrupting at irq 29
ohci2: OHCI version 1.0, legacy support
usb0 at ohci2: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci3 at pci1 dev 27 function 0: NEC USB Host Controller (rev. 0x43)
ohci3: interrupting at irq 63
ohci3: OHCI version 1.0
usb1 at ohci3: USB revision 1.0
uhub1 at usb1
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci4 at pci1 dev 27 function 1: NEC USB Host Controller (rev. 0x43)
ohci4: interrupting at irq 63
ohci4: OHCI version 1.0
usb2 at ohci4: USB revision 1.0
uhub2 at usb2
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci1 dev 27 function 2: NEC USB Host Controller (rev. 0x04)
ehci0: interrupting at irq 63
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci3 ohci4
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: single transaction translator
uhub3: 5 ports with 5 removable, self powered
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
wdc1 at pci2 dev 13 function 0: interrupting at irq 39
atabus1 at wdc1 channel 0
fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x81)
fwohci0: interrupting at irq 40
fwohci0: OHCI 1.1, 00:11:24:ff:fe:72:3a:de, 400Mb/s, 2048 max_rec, 8 ir_ctx, 8 it_ctx
gm0 at pci2 dev 15 function 0: Ethernet address 00:11:24:72:3a:de
gm0: interrupting at irq 41
bmtphy0 at gm0 phy 0: BCM5221 10/100 media interface, rev. 4
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fw0 at fwohci0: 00:11:24:ff:fe:72:3a:de:0a:02:ff:ff:f0:01:00:00
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITACD-RW  CW-8123, , CA14> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Apple Computer product 0x1000, rev 2.00/17.92, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 (mux ignored)
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: Apple Computer product 0x1000, rev 2.00/17.92, addr 2, iclass 3/1
ums0 at uhidev1: 5 buttons
wsmouse0 at ums0 (mux ignored)
uhidev2 at uhub0 port 2 configuration 1 interface 0
uhidev2: Apple Computer Apple Internal Trackpad, rev 2.00/0.06, addr 3, iclass 3/1
uhid0 at uhidev2: input=81, output=0, feature=16
wd0 at atabus1 drive 0: <Hitachi HTS541060G9AT00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs