Re: PenCentra130

[Yosuke Yamazaki <yosuke@t.toshima.ne.jp>]

山崎です。

> なかなか魅力的なスペックですね
今日秋葉で9.8k円でした^^;

> またシリアル端末を接続してみてはどうでしょうか。
結果から言いますと，シリアルで見ましたが途中で止まってしまいます。

以下長々とごめんなさい。シリアル端末に表示されました。
> mem_cluster_cnt = 2
> mem_clusters[0] = {0x0,0x65e000}
> mem_clusters[1] = {0x65e000,0x9a2000}
> loading 0x65e000,0x9a2000
> Copyright (c) 1996, 1997, 1998, 1999, 2000
>     The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
> 
> NetBSD 1.5 (RAMDISK) #0: Sat Nov 18 19:46:04 JST 2000
>     shin@touji:/u/obj/release/sys/arch/hpcmips/compile/RAMDISK
> NEC MC-R530 (NEC VR4121 rev1.0 131.072MHz)
> total memory = 16384 KB
> avail memory = 8584 KB
> using 230 buffers containing 920 KB of memory
> /u/src/release/src/sys/arch/hpcmips/vr/vr.c(294): vr_bus_reset() not implemented
> .
> mainbus0 (root)
> cpu0 at mainbus0: NEC VR4100 CPU (0xc60) Rev. 6.0 with software emulated floatin
> g point Rev. 0.0
> cpu0: L1 cache: 16KB/16B instruction, 8KB/16B data, direct mapped
> cpu0: No L2 cache
> cpu0: install VR specific idle routine
> vrip0 at mainbus0
> vrcmu0 at vrip0 addr 0xb000060-0xb00007f
> vrgiu0 at vrip0 addr 0xb000100-0xb00011f intr 8
> button0 at vrgiu0 port=3 id=6 active=high sense=edge
> button1 at vrgiu0 port=2 id=9 active=high sense=edge
> pwctl0 at vrgiu0 port=14 id=0 on=1
> vrbcu0 at vrip0 addr 0xb000000-0xb00001f
> vrbcu: cpu 131.072MHz, bus 32.768MHz, ram 65.536MHz
> com0 at vrip0 addr 0xc000000-0xc000007 intr 9: ns16550a, working fifo
> com0: console
> vrrtc0 at vrip0 addr 0xb0000c0-0xb0000df intr 2
> vrkiu0 at vrip0 addr 0xb000180-0xb00019f intr 7
> wskbd0 at vrkiu0 mux 1
> vrpmu0 at vrip0 addr 0xb0000a0-0xb0000bf intr 1
> vrdsu0 at vrip0 addr 0xb0000e0-0xb0000e7
> vrpiu0 at vrip0 addr 0xb000120-0xb0002bf intr 5
> wsmouse0 at vrpiu0 mux 0
> vrisab0 at vrgiu0:ISA port 0x14000000-0x18000000 mem 0x10000000-0x20000000
> isa0 at vrisab0
> pcic0 at isa0 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 589827
> pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
> pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only
> pcmcia0 at pcic0 controller 0 socket 0
> pcmcia1 at pcic0 controller 0 socket 1
> pcmcia at pcic0 controller 1 socket 0 not configured
> bivideo0 at mainbus0: pseudo video controller
> hpcfb0 at bivideo0: hpcrasops 640x240 pixels, 256 colors, 80x24 chars: tvram red
> raw
> wsdisplay0 at hpcfb0
> wsdisplay0: screen 0 added (std, vt100 emulation)
> btnmgr0 at mainbus0
> wskbd1 at btnmgr0 mux 1
> hpcapm0 at mainbus0: pseudo power management module
> apmdev0 at hpcapm0: Power Management spec V1.2
> /u/src/release/src/sys/arch/hpcmips/vr/vr.c(294): vr_bus_reset() not implemented
> .
> pcic0: using irq 589827 for socket events
ここでストップしてしまいます。

> あとですね、Microsoft が無料で配布している eMbedded Visual Tools
> というソフトウェアを Windows にインストールして PenCentra と
（略）

私の手に負えるかどうかわかりませんが，試してみます。